Basic Operations; Multiplexer Functions; Multiplexer Buttons; Menu Settings - Mitsubishi Electric DX-TL910U Installation And Operation Manual

Basic Operations

I Multiplexer functions
Buttons on the front of the unit can be used to perform
some of the multiplexer functions.
o Multiplexer buttons
1 Camera number buttons (1 to 9)
1 2
SPLIT/
ZOOM / 0
SEQUENCE
3 ZOOM button
2 SPLIT/SEQUENCE button
1. Camera number buttons (1 to 9)
Video images of cameras connected to CAMERA IN termi-
nals 1 to 9 on the rear of the unit are displayed.
By pressing a camera number button, video im-
ages can be displayed even if the camera is not set
for recording.
2. SPLIT/SEQUENCE button
The screen switches in order of SPLIT9 SCREEN
SETTING, 3 types of SPLIT4 SCREEN SETTING (a, b and
c), SPLIT4 SEQUENTIAL and SINGLE SEQUENTIAL set
in the <MPX DISPLAY SETTINGS> screen (SEQUENTIAL
display is skipped during playback).
Pressing the ZOOM button for more than 1
second on the front of this unit will switch the opera-
tion of camera number buttons and the SPLIT/SE-
QUENCE button to the screen of the monitor con-
nected to the OUTPUT B connector. Pressing the
ZOOM button for more than 1 second again can
switch to the screen of the monitor connected to the
OUTPUT A connector.
3. ZOOM button
When this button is pressed during single screen display,
magnification 100% screen appears and the magnification
centre point (X) is displayed at the centre. Pressing the
button again will switch the magnification to 200% and then
400%. By pressing the MOVE buttons, the magnified screen
can be moved vertically/horizontally with the centre point
as the axis ( see "ZOOM button operations", page 39).
When the ZOOM button is pressed, camera number
buttons 1 to 4 move the (X) on the screen.
I Menu settings
The operational conditions of this unit can be set in the
menu screens. The JOG/SHUTTLE is used to navigate and
to make changes in the MENU SETTINGS. Use the JOG
to move up/down/across and to make a change and use
the SHUTTLE to select and accept a change and to go to
the next or previous menu.
SHUTTLE ring
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Basic Operations
3 4 5 6 7 8
MOVE button
JOG dial
Example : Set DISPLAY MODE to "3" ( default : "1" ).
1. Set the MAIN switch on the rear of the unit to ON. Press
the POWER button on the front after the ACCESS indicator
turns off.
• "SETTING UP..." appears on the screen and the unit is
booted.
POWER button operation will not be accepted
9
while the ACCESS indicator is flashing. Press the
POWER button after the indicator turns off.
2. After boot-up, press the SET UP button inside the door on
the front of the unit.
• The <SETTINGS> screen appears.
<SETTINGS>
>>TIME DATE/DISPLAY SETTINGS
When the SET UP button is pressed and the
menu screen appears, the background darkens and
the displayed characters become easier to see.
3. Check to see that the cursor (>>) is positioned at "TIME
DATE/DISPLAY SETTINGS", and then turn the SHUTTLE ring
clockwise.
• The <TIME DATE/DISPLAY SETTINGS> screen appears (
see page 36).
<TIME DATE/DISPLAY SETTINGS>
>>TIME DATE ADJUST
<MODE 1>
01-01-2004 00:00:00
4. Turn the JOG dial to move the cursor to "DISPLAY MODE"
and turn the SHUTTLE ring clockwise.
• The background of the "DISPLAY MODE" setting turns red
and flashes.
When turning the JOG dial clockwise, the cursor
(>>) moves down. When turning counterclockwise,
the cursor (>>) moves up.
5. Turn the JOG dial to display "3".
• The display mode sample on the bottom of the screen
changes to <MODE 3>.
6. Turn the SHUTTLE ring clockwise.
• The setting is confirmed and flashing stops.
• To continue with other settings, repeat steps 4 and 5.
When turning the SHUTTLE ring counterclockwise
while the setting is flashing, the setting will return to
the previous setting.
To exit the screen, turn the SHUTTLE ring
counterclockwise.
MPX DISPLAY SETTINGS
MOTION DETECTION SETTINGS
RECORD SETTINGS
TIMER PROGRAM SETTINGS
INITIAL SET UP/INFORMATION
QUICK SETTINGS
MEMO:
DISPLAY MODE
CLOCK LOCATION SETTING
CAMERA DISPLAY NUMBER
CAMERA TITLE/MEMO SETTING
DUPLEX MODE DISPLAY BOTTOM
1
23