Toshiba E-STUDIO230 Operator's Manual page 213

Error Code
1C13 Message transmission error
1C14 Invalid parameter
1C15 Exceeding file capacity
1C20 System management module access
abnormality
1C21-1C22 Job control module access abnormality
1C30 Directory creation failure
1C31 File creation failure
1C32 File deletion failure
1C33 File access failure
1C40 Image conversion abnormality
1C60 HDD full failure during processing
Cause & Message Corrective Action
Turn the power OFF and then back ON.
Perform the job in error again.
When a template is used, form the template
again. If the error still occurs, turn the power
OFF and then back ON, and perform the job
again.
Ask your administrator to change the
"Fragment Page Size" setting for the Internet
Fax setting, or reduce the number of pages
and perform the job again.
Turn the power OFF and then back ON.
Perform the job in error again. If the recovery
is still not completed, contact your service
representative.
Turn the power OFF and then back ON.
Perform the job in error again. If the recovery
is still not completed, contact your service
representative.
Check if the access privilege to the storage
directory is writable. Check if the server or
local disc has a sufficient space in disc
capacity.
Check if the access privilege to the storage
directory is writable. Check if the server or
local disc has a sufficient space in disc
capacity.
Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, contact your service representative.
Check if the access privilege to the storage
directory is writable. Check if the server or
local disc has a sufficient space in disc
capacity.
Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, contact your service representative.
Reduce the number of pages of the job in error
and perform the job again. Check if the server
or local disc has a sufficient space in disc
capacity.
9
211