Toshiba E-STUDIO230 Operator's Manual page 66

6.BYPASS COPYING (Cont.)
8
Select the media type corresponding to
the paper that has been set, and then
press the [ENTER] button.
2
If you select the media type not corresponding to the paper that has
been set, it may cause a problem such as a paper jam, significant
image deterioration, etc.
Select other copy modes as required.
9
Press the [START] button.
When copying on OHP films, pick up copies one by one from the
inner tray.
When the exited copies are piled up, they will have more curl and it
may cause this OHP film cannot be projected properly.
64
2.HOW TO MAKE COPIES