Toshiba E-STUDIO230 Operator's Manual page 124

7.IMAGE EDITING (Cont.)
4
Place an original on the glass to specify
the area.
- Set the original face up with the bottom toward you, fit its top left
corner against the top left corner of the glass, and align it with the
original scale.
5
Using the original scale on the left and the
inner (top) scale, read the position of the
5
desired area as follows:
- X1 Distance from the top left to the left edge of the specified area.
- X2 Distance from the top left to the right edge of the specified
area.
- Y1 Distance from the top left to the upper edge of the specified
area.
- Y2 Distance from the top left to the lower edge of the specified
area.
4 rectangular areas can be specified on an original.
6
Enter the distance values read in step 5
for the specified area.
- Key in the value for X1 with the digital keys and press the [SET]
button.
- Similarly, set the values for X2, Y1 and Y2.
- When setting X1, X2, Y1, Y2 the display changes for entering the
next edit area.
7
Press the [ENTER] button.
8
Place the original(s).
- "1.SETTING ORIGINALS"
- Place the original(s) on the glass with its face down, with its
bottom toward you, with its top left aligned against the original
scale on the left side.
Select other copy modes as required.
9
Press the [START] button.
122
5.USING THE EDITING FUNCTIONS
Page 48