Table of Contents
Advertisement
6.5 SELECTING A BASE
The handsets can be registered up to 4 bases simultaneously.
To select a base:
1. Enter the menu by pressing
2. Select setup using the up
3. Press OK
4. Select SEL BASE using the up
5. Press OK
6. Select a base or select AUTO using the up
7. Press OK
When selecting the base, the currect selected base in indicated by a 'o' sign after the base
number. If you select 'Auto' the handset will automatically search for another base when you
are out of range!
7. TROUBLE SHOOTING
Symptom
No display
No tone
The icon
flashes
Base or handset do not ring The ringing volume is zero or
Tone is good, but there is no
communication
Not possible to transfer a call
on PABX
Telephone does not react to
pressing the keys
Topcom Butler 2511 Deluxe
/OK
and down
keys
and down
and down
Possible cause
Batteries uncharged
Handset turned OFF
Telephone cord badly
connected
The line is occupied by
another handset
Handset out of range
The base has no power
supply
The handset is not registered
on the base
low
The dialling mode is wrong
The FLASH time is too short Set the unit to Long Flash
Manipulation error
Topcom Butler 2511 Deluxe
keys
keys
Solution
Check the position of the
batteries
Recharge the batteries
Turn ON the handset
Check the telephone cord
connection
Wait until the other handset
hangs up
Bring the handset closer to
the base
Check the mains connection
to the base
Register the handset on the
base
Adjust the ringing volume
Adjust the dialling mode
(pulse/tone)
time
Remove the batteries and
put them back in place
21
Advertisement
Table of Contents
