Using Toptools; To Install Toptools; To Run Toptools; To Get More Information About Toptools - HP 900 Reference Manual

Using TopTools

Windows 2000
Configuring the OmniBook
Using TopTools
HP TopTools is for network managers and administrators with responsibilities for
computer system management. It offers configuration and security options that allow you
to check what hardware and software components are installed on your computer and
how well they are working.
TopTools is not available at this time under Windows 2000. Check the Customer Care
website (http://www.hp.com/cposupport/eschome.html) for HP TopTools for Windows
2000.

To install TopTools

The TopTools package is included with the OmniBook, but you must install it before you
can use it. On Windows NT systems, you will need administrator privileges to install
TopTools software. TopTools is not available at this time for Windows 2000.
1. Start Windows, if it is not already running.
2. Click Start, Programs, HP TopTools for Notebooks, Setup.

To run TopTools

TopTools may be run locally on a PC or remotely by a network administrator. TopTools
is not available at this time for Windows 2000.
To run TopTools locally, click Start, Programs, HP TopTools for Notebooks, HP
TopTools.

To get more information about TopTools

For information on HP TopTools, compatible HP computers, and how they lower PC
operating costs, see the HP website at http://www.hp.com/toptools.
92 Reference Guide