Checking The Status Of The Omnibook; To Check Power Status And Drive Activity - HP 900 Reference Manual

Checking the Status of the OmniBook

Operating the OmniBook
Checking the Status of the OmniBook

To check power status and drive activity

The OmniBook has status lights that report power status and drive activity. When the
floppy disk drive is installed in the external module bay, the following lights are present
on the front of the OmniBook and the external module bay.
1. Power status light.
Green light. OmniBook is on.
Amber light. OmniBook is in Standby or Suspend mode.
No light. OmniBook is in Off or Hibernate mode.
Green and amber light. OmniBook failed when resuming. Reset the OmniBook.
2. Drive activity light.
Green light. OmniBook is accessing the hard disk drive or a drive in the external
module bay.
3. Charging status light.
Green light. The ac adapter is connected and battery is full or has stopped
charging.
Blinking green light. The ac adapter is connected and battery is charging.
No light. The ac adapter is not connected or the battery is not installed.
4. Floppy disk drive light.
Green light. The OmniBook is accessing the floppy disk drive.
22 Reference Guide