Expanding the OmniBook
Using the External Module Bay
Removing
Before you remove the
cable or plug-in module.
(The order doesn't
matter.)
Installing
After you insert the
cable and plug-in
module. (The order
doesn't matter.)
You can plug in or unplug an empty module bay at any time.
64
Windows 95 or 98
with "hot-swap"
1. Close files on the
module drive.
2. Right-click the plug-
in module icon in the
taskbar, then click
Remove Device.
When prompted to
remove the module,
click OK.
–or–
For a hard drive
module, click Start,
Shut Down to shut
down the computer.
Nothing required.
–or–
For a hard drive
module, restart the
computer.
Reference Guide
Windows 95, 98, or NT
(no "hot-swap")
1. Close all files.
2. Click Start, Shut
Down to shut down
the computer.
Restart the
computer.
Windows 2000
1. Close files on the
module drive.
2. Left-click the Unplug
or Eject Hardware
icon on the taskbar,
and select the
module you want to
remove. When
prompted to remove
the module, click OK.
Nothing required.