HP 900 Reference Manual page 90

Hewlett-packard omnibook reference guide
Hide thumbs Also See for 900:
Table of Contents

Advertisement

Configuring the OmniBook
Using BIOS Setup
Power Menu
If you're using Windows 98 in its standard power mode, power options you set in Power
Management Control Panel override corresponding settings in the Power menu.
If you're using Windows 2000, only the settings marked with * are used, and other
settings in the Power menu are ignored.
Setting
Power Management
Mode
Smart CPU Mode
Standby Time-out
Suspend Time-out
Hibernate Time-out
Hard Disk Time-out
Time-out on AC
Power Button Mode
Lid Switch Mode
Resume on Serial Ring
Resume on Time of Day
Resume Time
Auto Suspend on
Undock*
Auto Turn-on on Dock*
* For Windows 2000, only these settings are used. All other settings in this menu are ignored.
90
Description
Disables time-outs, selects a combination of time-outs, or
allows customized time-outs.
Enables automatic CPU power savings when running on
battery power. Absence of keyboard, mouse, and hard disk
activity could cause slower CPU response. For a model
without "900 B" after the serial number, this should normally
be Off to avoid interfering with time sensitive operations—
and this setting applies on both battery and ac power.
Sets the period of inactivity after which the computer goes
from On to Standby power mode.
Sets the period of inactivity after which the computer goes
from Standby to Suspend power mode. (Skips Standby
mode if that time-out is disabled.)
Sets whether the computer goes from Suspend to Hibernate
power mode after the indicated period of inactivity. (Skips
Suspend mode if that time-out is disabled.)
Sets the period of hard disk inactivity after which the hard
disk stops spinning. Also affects a hard disk drive in the
plug-in module bay.
Sets whether power management time-outs occur while the
ac adapter is connected.
Sets the action of the blue power button when pressed for
less than 4 seconds.
Sets the action when the OmniBook lid closes.
Sets whether the system resumes from Suspend if a ring
signal is received.
Sets whether the system resumes from Suspend at a
defined time of day.
Sets the 24-hour time when the system resumes from
Suspend if enabled.
Sets whether the OmniBook suspends after undocking.
Sets whether the OmniBook turns on after docking.
Reference Guide
Default
Max Power
Savings
On ("900 B")
Off (non
"900 B")
2 minutes
4 minutes
4 hours
2 minutes
Disabled
Suspend
Turn off LCD
Enabled
Disabled
When Lid
Closed
Enabled

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omnibook 900b - notebook pcOmnibook 900

Table of Contents