International - HP 900 Reference Manual

Hewlett-Packard Company
Address:
Mobile Computing Division
19310 Pruneridge Ave.
Cupertino, CA 95014
declares that the following product
HP OmniBook 900
Product name:
All
Options:
conforms to the following product specifications
IEC 950:1991+A1,A2,A3,A4 / EN 60950 (1992)+A1,A2,A3,A4,A11
Safety:
GB4943-1995
IEC 825-1:1993 / EN 60825-1:1994, Class 1
CISPR 22:1993+A1,A2 / EN 55022 (1994)+A1,A2: Class B [1 ]
EMC:
GB9254-1988
EN 50082-1:1992
FCC Title 47 CFR, Part 15 Class B
AS/NZS 3548:1995 Rules and Regulations of Class B
The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and EMC Directive
Supplementary
89/336/EEC and carries the CE mark accordingly.
Information:
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
The ac adapter shipped with this product is designed to operate on all power systems, other than IT power
systems.
[1] The product was tested in a typical configuration with Hewlett-Packard personal computer peripherals.
Quality Department,
Hewlett-Packard Company
Mobile Computing Division

International

Products sold internationally by Hewlett-Packard and its authorized dealers meet the
specifications listed below.
Declaration of Conformity (according to ISO/IEC Guide 22 and EN 45014)
IEC 801-2:1991 / prEN 55024-2 (1992): 4kV CD, 8kV AD
IEC 801-3:1984 / prEN 55024-3 (1991): 3V/m
IEC 801-4:1988 / prEN 55024-4 (1992): 0.5 kV signal lines, 1.0kV power lines
Ansi C63.4:1992
Specifications and Regulatory Information
Regulatory Information
Reference Guide 139