Before Operating; Getting Started; Clock Setting; Stop/Clear - Sharp Carousel R-990C Operation Manual

BEFORE OPERATING

* This oven is preset with the INFORMATION GUIDE ON.
To assist you in programming your oven, the information guide will appear in the display.
In this manual, the display of information guide is abbreviated.
* When you become familiar with your oven, the information guide can be turned off. Check page 22.

Getting Started

Step
Plug the oven into a power point and switch
1
on the power.
2
Close the oven door.
Press the STOP/CLEAR pad so that the
oven beeps.
3

Clock Setting

* To enter the present time of day 11:34 (AM or PM).
Step
Press the CLOCK pad.
1
Enter the correct time of day by pressing the
numbers in sequence.
2
Press the CLOCK pad again.
3

Stop/Clear

Use the STOP/CLEAR pad to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
To Cancel a Programme During Cooking
Press the STOP/CLEAR pad twice.
Procedure
Procedure
Pad Order
STOP
CLEAR
Pad Order
CLOCK
1 1 3 4
CLOCK
7
Display
as above
Only the dots will remain.
Display
(operation guide off:
The dots (:) will flash on and
off.
)