HP 600 Series User Manual page 97

1. Double-tap the HP dialup icon on your desktop. The HP dialup
window appears.
2. Select the location or connection that you want to modify from the
drop-down lists, and then tap Edit.
3. In the Connections or Locations dialog box, tap Create New Connec-
tion or Create New Location. The dialog boxes will appear just as
they did when you created the first connection.
4. Fill in the necessary information, according to the type of connection
you wish to make. (Refer to sections earlier in this chapter.)
5. When you are finished, tap Done. Your new connection or location
will appear in the drop-down list in the HP dialup window.
1. Double-tap the HP dialup icon on your desktop.
2. Select the connection or location that you want to modify from the
drop-down lists.
3. Tap Edit.
4. In the Connection or Location dialog box, tap Modify.
5. Make the modifications you want, and then tap Done to save your
changes.
You can also create connections to your ISP or network by configuring the
necessary programs manually. Before you can dial up, you will need to:
• Install and configure a PC Card modem (models 680e and 690e only).
Follow the instructions provided by your modem manufacturer.
• Establish an account with an Internet Service Provider (ISP) or your
corporate network administrator (for remote access to your corporate
network). Note the same information that is presented in the previous
sections in this chapter.
• Set up a Remote Networking connection.
• Set dialing patterns and dialing locations.
| |