HP 600 Series User Manual page 36

|
If you are traveling without your docking cradle or you need to synchronize
files with your home computer while the docking cradle is connected to your
office PC, you can connect your HP Jornada directly to a desktop PC using
only the sync cable. (You can also connect and synchronize by infrared. For
more information, see the Connecting by infrared section in this chapter.)
1. If it is attached, disconnect the telephone cable from your
HP Jornada.
2. Connect the AC adapter to the DC jack on the right side of the
HP Jornada, and then plug in the power cable.
3. Insert the 9-pin end of the sync cable into a serial port on your
desktop PC.
4. Fully insert the flat end of the sync cable, arrow side up, into the
serial port on your HP Jornada.