HP 600 Series User Manual page 21

1. Connect the cable from the AC adapter to the DC jack on the right
side of your HP Jornada.
2. Connect the power cable to the AC adapter.
3. Plug the power cable into an AC power outlet.
The backup battery protects your data when the main battery runs out of
power. The backup battery does not provide enough power to operate your
HP Jornada, but it will preserve your data while you replace the main battery
or while you connect to AC power to recharge. The 3-V CR2032 coin-cell
backup battery is preinstalled. When you begin using your HP Jornada, you
do not need to remove the cover plate or install the backup battery—simply
activate the backup battery by using the following procedure.
1. Remove the yellow sticker from the bottom of your HP Jornada.
2. Pull out the tape that protrudes from the battery compartment.
Use the stylus in much the same way you would use a mouse to navigate
and select objects on screen. You can also use your fingertip to tap the touch
screen, but the stylus provides the greatest accuracy.
For convenience, the stylus is stored in the stylus slot on the front of the
HP Jornada. To remove the stylus, push on the stylus to release the catch as
you slide it out of the slot.
Managing battery power
| |