HP 600 Series User Manual page 86

|
After you have configured your connection to your ISP, you are ready to
connect your telephone line to your built-in modem or PC Card modem and
then dial in. Use this procedure to connect to an analog telephone line.
Follow the instructions provided by your modem manufacturer to connect to
the telephone line supported by your modem.
1. Connect the telephone cord to the telephone jack.
2. Connect the other end of the telephone cord to the telephone
connector on the side of your HP Jornada or to your PC Card modem
(following the instructions provided by your modem manufacturer).
When you are ready to dial in to your ISP, use the HP dialup window.
1. Double-tap the HP dialup icon on your desktop. The HP dialup
window appears.
2. Select a location and a connection from the drop-down boxes, and
then tap Continue.
Traveling with your HP Jornada