HP 600 Series User Manual page 23

Before you can use the stylus to navigate, you must calibrate the touch
screen to align the image on the screen with the touch-sensitive coating. The
first screen of the Welcome Wizard prompts you to calibrate the touch screen
by tapping a series of targets at different locations on the screen.
From time to time, you might notice that the accuracy of your stylus tap
diminishes. When this happens, you can return to this screen to calibrate
your touch screen.
1. On the Start menu, point to Settings, tap Control Panel, and then
double-tap the Stylus icon.
–or–
Press
num lk alt
ctrl
You can also use the Stylus control panel to set options for double-tap rate
and physical distance between taps.
Resetting
| |