Changing The Ringer Sound; Making Telephone Calls - Cisco 7940 User Manual

Making Telephone Calls

Press the VOLUME key to hear a current ringer volume.
Step 1
While the ring plays, press the + or - on the VOLUME button to respectively increase or decrease the
Step 2
ringer volume to the desired level.

Changing the Ringer Sound

Change the sound used by the ringer by performing the following steps.
Step 1 Press the settings button.
Step 2 Press the Scroll key to select Ring Type from the Settings menu.
Press the Select softkey to display the ring types list.
Step 3
Press the Scroll key to highlight an available ring type.
Step 4
Press the Play softkey to hear the highlighted ring type.
When you find the ring type you want, press the Select softkey and then press the OK softkey.
Step 5
Press the Back softkey to exit the Settings menu.
Step 6
Press the Back softkey again to display the main LCD screen.
Step 7
Making Telephone Calls
These sections describe how you can place, answer, or manage a telephone call:
•
•
•
•
•
•
•
•
•
•
•
•
Placing a Call Using a Telephone Number
You can place a call with the Cisco IP Phone 7940/7960 in any of the following ways:
Cisco SIP IP Phone Model 7940/7960 User Guide
3-4
Placing a Call Using a Telephone Number, page 3-4
Placing a Call Using an E-mail Address, page 3-5
Answering a Call, page 3-5
Ending a Call, page 3-5
Muting a Call, page 3-6
Placing a Call on Hold, page 3-6
Transferring a Call, page 3-6
Transferring a Call Without Talking to the Receiver, page 3-6
Redialing the Last Number Dialed, page 3-7
Making Calls from the Directory, page 3-7
Using Call Forwarding, page 3-8
Making Conference Calls, page 3-9
Chapter 3 Using the Cisco IP Phone 7940/7960
OL-1365-01