KTI Networks KSC-240 Installation Manual page 35

The converter can convert an RS-232 device into a
multi-drop network.
The configuration for MASTER node is:
SW1-4 TXE
SW1-6 RXC
SW1-5 RTS-D
SW2-1 SDD
It also can convert an RS-232 device into a SLAVE node in this multi-drop
network.
The configuration for a SLAVE node is:
SW1-4 TXC
SW1-6 RXE
SW1-5 RTS-D
SW2-1 SDD
Enable Driver always
Enable Receiver RTS/ADC Control
Disable RTS control
Disable ADC control
Enable RTS/ADC Control for Driver
Enable Receiver always
Disable RTS control
Disable ADC control
-35-
Master node in this