Rs-422 Point-To-Point Circuit - KTI Networks KSC-240 Installation Manual

RS-485 and RS-422 are in wide use as an interface for telecommunica-
tions, industrial, medical, security and networking applications. The fol-
lowing sections describe examples of some of popular physical
topologies.

3.1 RS-422 Point-to-Point Circuit

This is the simplest configuration, just one driver and one receiver. If
termination is used, it is only required at the receiver. Most RS-422 cables
used to connect telecom or data-com equipment are point to point links.
The converter can convert an RS-232 device into a
point-to-point circuit.
The configuration is:
SW1-4 TXE
SW1-6 RXC
SW1-5 RTS-D
SW2-1 SDD
Enable Driver always
Enable Receiver RTS/ADC Control
Disable RTS control
Disable ADC control
-33-
Driver node in this