Table of Contents
Advertisement
SW2-1
SDD Disable ADC control for RS-485/422 driver
SDE
Enable ADC control for RS-485/422 driver
ADC method involves special circuitry that senses when data is received
on the RS-232 interface and is being transmitted and automatically en-
ables the RS-485/422 driver as well as disabling the driver within one
character length of the end of transmission. This is a useful method for
driver control since it needs no software involved.
In order to obtain an optimal performance, set SW2-2 ~ SW2-8 the asso-
ciated timing parameter for each RS-232 baud rate.
SW2-2
1200
SW2-3
2400
SW2-4
4800
SW2-5
9600
SW2-6
19200
SW2-7
38400
SW2-8
115200
ADC Timing parameter for RS-232 baud 1200
ADC Timing parameter for RS-232 baud 2400
ADC Timing parameter for RS-232 baud 4800
ADC Timing parameter for RS-232 baud 9600
ADC Timing parameter for RS-232 baud 19200
ADC Timing parameter for RS-232 baud 38400
ADC Timing parameter for RS-232 baud 115200
-27-
Advertisement
Table of Contents
