Set Lengths For Code 93 - Symbol P 300STD Product Reference Manual

Programming the Scanner

Set Lengths for Code 93

Lengths for Code 93 may be set for any length, one or two discrete lengths, or lengths within
a specific range. The length of a code refers to the number of characters (i.e., human readable
characters), including check digit(s) the code contains.
One Discrete Length - This option allows you to decode only those codes containing a
selected length. For example, if you select Code 93 One Discrete Length, then scan 1, 4, only
Code 93 symbols containing 14 characters are decoded. Numeric bar codes begin on page
2-120. If you make an error or wish to change your selection, scan CANCEL on page 2-
122.
Code 93 - One Discrete Length
Two Discrete Lengths - This option allows you to decode only those codes containing
two selected lengths. For example, if you select Code 93 Two Discrete Lengths, then
scan 0, 2, 1, 4, only Code 93 symbols containing 2 or 14 characters are decoded.
Numeric bar codes begin on page 2-120. If you make an error or wish to change your
selection, scan CANCEL on page 2-122.
Code 93 - Two Discrete Lengths
2-63