Advanced Data Formatting (ADF)
Send Pause
Send Pause
Setup Field(s)
Use the following bar codes to move the cursor in relation to a specified character.
Note: If there is no match when the rule is interpreted and the rule fails, the
next rule is checked.
Move Cursor To a Character
Scan the Move Cursor To Character bar code, then any printable ASCII character from the
Alphanumeric Keyboard
on page 3-84. This moves the cursor to the position after the
matching character. If the character is not there, the rule fails and ADF tries the next rule.
<FN3>6A5230
Move Cursor To
Character
Move Cursor to Start of Data
Scan this bar code to move cursor to the beginning of the data.
<FN3>6A1231
Move Cursor To Start
3-29