Symbol P 300STD Product Reference Manual page 103

Programming the Scanner
Length Within Range - This option allows you to decode a code type within a specified range.
For example, to decode I 2 of 5 symbols containing between 4 and 12 characters, first scan I
2 of 5 Length Within Range. Then scan 0, 4, 1, and 2 (single digit numbers must always be
preceded by a leading zero). Numeric bar codes begin on page 2-120. If you make an error
or wish to change your selection, scan CANCEL on page 2-122.
I 2 of 5 - Length within Range
Any Length - Scanning this option allows you to decode I 2 of 5 symbols containing any
number of characters.
Note: Selecting this option may lead to misdecodes for I 2 of 5 codes.
I 2 of 5 - Any Length
2-67