Set Lengths For Code 93 - Symbol P370 Product Reference Manual

P470/370 RF Scanner Product Reference Guide

Set Lengths for Code 93

Lengths for Code 93 may be set for any length, one or two discrete lengths, or lengths
within a specific range. The length of a code refers to the number of characters (i.e., human
readable characters), including check digit(s) the code contains.
One Discrete Length - This option allows you to decode only those codes containing a
selected length. For example, if you select Code 93 One Discrete Length, then scan 1, 4,
only Code 93 symbols containing 14 characters are decoded. Numeric bar codes begin
on page 5-101. If you make an error, or wish to change your selection, scan CANCEL
on page 5-103.
CODE 93 - ONE DISCRETE LENGTH
Two Discrete Lengths - This option allows you to decode only those codes containing two
selected lengths. For example, if you select Code 93 Two Discrete Lengths, then scan 0,
2, 1, 4, only Code 93 symbols containing 2 or 14 characters are decoded. Numeric bar
codes begin on page 5-101. If you make an error, or wish to change your selection, scan
CANCEL on page 5-103.
CODE 93 - TWO DISCRETE LENGTHS
5-56