Transmit "No Read" Message; Decode Buffering - Symbol P 300STD Product Reference Manual

Programming the Scanner

Transmit "No Read" Message

When enabled, the scanner transmits "NR" if it does not decode a symbol. Any enabled
prefixes or suffixes are appended around this message. When disabled, if a symbol does not
read, nothing is sent to the host.
Enable No Read
Disable No Read

Decode Buffering

This option permits the scanner to store decode data until the host device is ready to receive
them. If the scanner reaches its capacity to store decoded symbols before the host is ready,
subsequent trigger pulls have no effect until a buffer is available.
Disable Decode Buffering
Enable Decode Buffering
2-19