HP LC3260N User Manual page 57

sa6ldtv.book Page 47 Tuesday, February 21, 2006 12:35 PM
Picture quality questions
Symptom
Part of my picture is cut off, or the
picture is not centered.
My picture image is too large or
too small.
My picture is unstable.
There are bright spots on my screen.
Remote control questions
Symptom
The remote control does not work.
The remote control does not control
other home entertainment equipment.
My universal remote control does not
find an HP TV code.
Remedy
Check the position adjustment settings, and adjust the screen settings
accordingly.
Press the Aspect button on the remote control, and adjust properly.
Verify that the external device resolution setting is correct. Adjust to the
appropriate resolution.
In some cases, an LCD panel may have pixels that do not operate
properly. This is common to all LCD displays used in products supplied
by all vendors and is not specific to this product.
Remedy
Check the following, and try the proposed solution:
Batteries are inserted with polarity aligned.
■
Make sure the remote control batteries are fresh. If they are worn
■
out, replace the batteries with new batteries.
Make sure the remote control is within correct operating range.
■
Make sure the remote sensor window is not under too much light,
■
direct sunlight, or strong artificial light.
Make sure there are no obstacles; check that there is nothing
■
between the remote control and the sensor window on the display.
Make sure the remote control is aimed at your TV and is not farther
■
than 16.4 feet (5 meters) away.
This is not a universal remote control. It only works with your HP
television.
When you want to program a universal remote control to operate your
HP TV, if HP is not listed in the supported brand codes, use a Philips TV
code. The HP remote control transmits Philips-licensed remote control
codes.
After programming your universal remote control with a Philips TV code,
it can operate your HP TV functions for: Volume, mute, power, and input
source.
47
Troubleshooting