sa6ldos.fm Page 30 Friday, March 10, 2006 4:33 PM
Choosing the Digital Output mode
You must be watching a digital TV channel to access
the Audio/Digital Output menu.
In the Audio/Digital Output menu, select the mode for
the signal provided on the Coaxial digital audio output
connector: PCM or Digital Dolby. Digital Dolby is a
digital signal. Choose the PCM option when your
external digital audio system does not support
To hear analog sound from an analog source on your
digital audio system, you must connect the Audio Out
left and right connectors on the TV to your sound
Reseting the Audio options
Selecting the Reset option resets all Audio options to
default values. To reset, highlight Reset and press OK.
Using the Setup Menu
The Setup menu options define the language for the
OSD menus, and time, channel setup (scan), closed
caption, aspect, and other values. The first-time setup
initially sets many of these values, but you can define
them by using the Setup menu.
Auto Ch Memory
(scan for channels)
HP LCD HDTV User's Guide
(Digital) CC Advanced:
Text Size: Auto/Small/
Signal level (digital)
Searching for channels
If you skipped the channel scanning during initial
setup, or if the initial setup does not find all the
channels, use the Setup menu to scan and find the
channels. The scan continues until the channel is found
or confirmed no signal.
In the Air/Cable option, select Air or Cable.
Select Auto Ch Memory, and press the right
arrow to begin the scan for channels.
The scan continues until each channel is found or
confirmed as no signal. Wait for the search to
complete. It may take several minutes to find all