Lifting The Tv; Attaching Or Removing The Stand - HP LC3260N User Manual

32-inch (81-centimeter) lcd high-definition television
Hide thumbs Also See for LC3260N:
Table of Contents

Advertisement

Available languages

Available languages

sa6ldtv.book Page 8 Tuesday, February 21, 2006 12:35 PM

Lifting the TV

The TV is heavy; be sure to use ergonomically correct
lifting procedures when moving the TV.
Due to the size and weight of the TV, it is
recommended that a minimum of two people move it.
To transport the TV, grasp the display in the area under
and above the screen.
Move the product gently. Never place the TV with the
glass screen facing downward, unless it is protected
with pads.

Attaching or removing the stand

Your TV comes with a stand that must be attached to
the display. Reverse these steps to remove the stand.
c
CAUTION: Use two people to assemble
the TV.
Before attaching the stand, unplug the AC cord from
the AC input.
1
Locate the TV stand (two pieces), eight screws of
mounting hardware, and tool from the box.
8
HP LCD HDTV User's Guide
2
Place the base onto the pedestal, insert four short
screws, and tighten using the provided tool.
3
Carefully place the TV panel with the glass screen
facing downward on a padded, stable table.
Position the bottom of the TV near the edge of the
table.
w
WARNING: Do not drop the stand onto
the TV.
4
Insert the assembled stand into the opening on the
bottom of the TV.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents