Changing The Tv Settings; Using The Osd Menus - HP LC3260N User Manual

sa6ldtv.book Page 27 Tuesday, February 21, 2006 12:35 PM
Change the TV settings by using the onscreen display
(OSD) menus.

Using the OSD Menus

Operate the OSD menus using the buttons on the
remote control to highlight, adjust, and enter items as
described here.
back
Last

Changing the TV Settings

Source
OK
Info
Ch+
Ch-
Remote
control Description
Menu Menu (Exit) displays (or closes)
the OSD.
OK OK selects highlighted item in
the OSD.
Arrow The Arrow buttons move right,
buttons left, up, or down in the menu or
adjusts an item.
Source Source selects the input source.
Choose the input before
displaying the OSD.
Back Back moves up (back) one item or
menu level.
1
Press the Source button as needed to select the
Input signal source for the TV. The OSD menus
and options you see depend on the type of input
selected.
2
Open the OSD by pressing the Menu button. The
available menus appear as a list.
3
Press the direction buttons to highlight the menu
you want, and then press the OK button to move
to it.
4
Press the direction buttons to move within the
menu and highlight an option, and then press the
OK button to move into the option.
5
Continue using the direction buttons to highlight
and adjust an item and the OK button to enter the
change. You can press the Source button to move
out of an option or to move up one menu level.
6
When you are finished, press the Menu button to
close the menu.
Changing the TV Settings
27