Table of Contents
Advertisement
Appendix A - Using the Suspend to RAM Function
A.1 Using the Suspend to RAM Function
If you are using the Windows
the steps below.
1.
Select “Power Management Setup” in the main menu screen and
press <Enter>.
2.
In the “ACPI Function” field, select “Enabled”.
3.
In the “ACPI Suspend Type” field, select “S3(STR)”.
ACPI Function
ACPI Suspend Type
Power Management Option
HDD Power Down
Suspend Mode
Video Off Option
Video Off Method
MODEM Use IRQ
Soft-Off By PWRBTN
Run VGABIOS if S3 Resume
PWR Lost Resume State
IRQ/Event Activity Detect
u
↑↓→← Move
The settings on the screen are for reference only. Your version may not be
identical to this one.
4.
Press <Esc> to return to the main menu.
5.
Select “Save & Exit Setup” and press <Enter>. Type <Y> and
press <Enter>.
6.
Install Windows
to ensure that the ACPI function is supported.
If you have previously installed Windows
upgrade the system in order to suppor t ACPI. Please contact
Microsoft for upgrade information.
Using the Suspend to RAM Function
®
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
Enabled
S1(POS)
User Define
Disabled
Disabled
Suspend -> Off
V/H SYNC+Blank
3
Instant-off
Auto
Keep Off
Press Enter
Enter:Select
+/-/PU/PD:Value F10:Save
F5:Previous Values
F6:Fail-Safe Defaults
98 by typing the following parameter. This is
®
[drive]:>setup /p j
98 operating system, please follow
Menu Level
ESC:Exit
F7:Optimized Defaults
98, you need to
®
Item Help
F1:General Help
A
9 9
Advertisement
Table of Contents
