Belkin PM11-UL/RAMA User Manual page 70

3
Award BIOS Setup Utility
complete task by themselves. Your system supports five modes, 0
(default) to 4, which primarily differ in timing. When Auto is
selected, the BIOS will select the best available mode after
checking your drive.
IDE Primary Master/Slave UDMA and IDE Secondary Master/Slave
UDMA
These fields allow you to set the Ultra DMA in use. When Auto
is selected, the BIOS will select the best available option after
checking your hard drive or CD-ROM.
VIA OnChip PCI Device
Move the cursor to this field and press <Enter>. The following fields
will appear.
VIA-3058 AC97 Audio
Onboard LAN (PM11-EL/RAMA and PM11-UL/RAMA only)
By default, the onboard LAN chip is enabled. If you are not using
the onboard LAN, set this field to Disabled.
70
Auto The BIOS will automatically set the system ac-
cording to your hard disk drive’s timing.
Mode 0-4 You can select a mode that matches your hard
disk drive’s timing. Caution: Do not use the wrong
setting or you will have drive errors.
Auto The BIOS will automatically detect the settings for
you.
Disabled The BIOS will not detect these categories.
Auto Select this option when using the onboard audio
codec.
Disabled Select this option when using a PCI sound card.