Table of Contents
Advertisement
DRAM Clock
This field is used to select the clock speed of the DIMM.
By SPD
The EEPROM on a DIMM has SPD (Serial
Presence Detect) data str ucture that stores
information about the module such as the
memory type, memor y size, memor y speed, etc.
When this option is selected, the system will run
according to the information in the EEPROM.
100 MHz
The memory clock speed will run at 200MHz.
133 MHz
The memory clock speed will run at 266MHz.
DRAM Timing
This field is used to select the timing of the DRAM.
By SPD
The EEPROM on a DIMM has SPD (Serial
Presence Detect) data str ucture that stores
information about the module such as the
memory type, memor y size, memor y speed, etc.
When this option is selected, the system will run
according to the information in the EEPROM.
Manual
It allows you to configure the fields that follow.
The system will run according to the settings in
these fields.
SDRAM C AS Latency
The default setting is 3 which is 3 clock cycles for the CAS
latency.
Bank Interleave
The options are 2 Bank, 4 Bank and Disabled.
Precharge to Active (Trp)
The options are 2T and 3T.
Award BIOS Setup Utility
3
65
Advertisement
Table of Contents
