Table of Contents
Advertisement
4
Supported Software
4.2 Hardware Monitor
The mainboard comes with the Hardware Monitor utility contained in
the provided CD. It is capable of monitoring the system’s hardware
conditions such as the temperature of the CPU and system, voltage,
and speed of the CPU and chassis fans. It also allows you to
manually set a range to the items being monitored. If the values are
over or under the set range, a warning message will pop-up. The
utility can also be configured so that a beeping alarm will sound
whenever an error occurs. We recommend that you use the “Default
Setting” which is the ideal setting that would keep the system in
good working condition.
To install the utility, insert the CD into a CD-ROM drive. The autorun
screen (Main Board Utility CD) will appear. Click the “Hardware
Monitor” button to install the utility. Refer to its “readme” file for
instructions on using the utility.
4.3 VIA Service Pack
The CD in the mainboard package also comes with the VIA Service
Pack. The service pack includes the following drivers.
• VIA ATAPI Vendor Suppor t Driver
• AGP VxD Driver
• IRQ Routing Miniport Driver
• VIA INF Driver
To install the drivers, insert the CD into a CD-ROM drive. The
autorun screen (Main Board Utility CD) will appear. Click the “VIA
Service Pack” button. For installation instructions or information, click
the “Read Me” button in the autorun screen.
94
Note:
Use this utility only in Windows
W indows
ME, Windo ws
®
Windows
XP operating system.
®
98, Windows
®
2000, W indows NT
®
98 SE,
®
4.0 or
®
Advertisement
Table of Contents
