Belkin PM11-UL/RAMA User Manual page 23

2.5 Jumper Settings for Wake-On-USB 2.0
Keyboard/Mouse (PM11-UL/RAMA only)
J14
J13
1-2 On: Enabled
Wake-On-USB 2.0 Keyboard/Mouse - J13 and J14
The Wake-On-USB 2.0 Keyboard/Mouse function allows you to use
a USB keyboard or USB mouse to wake up a system that is in the
S3 (STR - Suspend To RAM) state. Set J13 and J14 to Enabled only
if you are using this function with a device that is connected to the
USB 2.0 port. Make sure “Resume on PCI Event” (“IRQ/Event
Activity Detect” field) in the Power Management Setup submenu of
the BIOS is also set to Enabled.
Important:
• If you are using the Wake-On-USB Keyboard/Mouse
function for 2 USB ports, the 5VSB power source of your
power supply must support ≥ 1.5A.
• If you are using the Wake-On-USB Keyboard/Mouse
function for 3 or more USB ports, the 5VSB power source
of your power supply must support ≥ 2A.
1 2 3
Hardware Installation
J14
1 2 3
Wake-On-USB 2.0
KB/Mouse (J13 and J14)
J13
1 2 3
J14
J13
2-3 On: Disabled
(default)
2
23