Belkin PM11-UL/RAMA User Manual page 76

3
Award BIOS Setup Utility
Power Management Option
This field allows you to select the type (or degree) of power saving
by changing the length of idle time that elapses before the “Suspend
Mode” field is activated.
Min Saving
Max Saving
User Define
HDD Power Down
After the set time of system inactivity, the hard disk drive will be
powered down while all other devices remain active.
Suspend Mode
This is selectable only when the Power Management field is set to
User Define. When the system enters the Suspend mode according
to the power saving time selected, the CPU and onboard
peripherals will be shut off.
Video Off Option
Always On
Suspend -> Off
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC + Blank This will cause the system to turn off the
Blank Screen
DPMS Support Initializes display power management signaling.
76
Minimum power saving time for Suspend mode = 1
hr.
Maximum power saving time for Suspend mode =
1 min.
Allows you to set the power saving time in the
“Suspend Mode” field.
The system BIOS will never turn off the screen.
The screen is off when the system is in the
Suspend mode.
ver tical and horizontal synchronization ports
and write blanks to the video buffer.
This only writes blanks to the video buffer.
Select this if your video board suppor ts it.