Advertisement
3.0 SAfETY NOTES
before you make any connections: disconnect your equipment from the 230 V main power
„
„
to avoid electric shocks during installation.
Short circuit in the cable MAY permanently damage your Digital Receiver.
„
„
Never install the antenna outside your house or in humid rooms such as bathrooms.
„
„
Never use AC adaptors with wrong specifi cations, this MAY permanently damage your
„
„
antenna or Digital Receiver. Always check voltages and polarisation of the adaptor before
connecting it.
4.0 CONNECTING THE ANTENNA
1. Check if the broadcast in your country is horizontal or vertical polarized.
2. Click the antenna in the plastic holder as shown in the pictures:
H
H
(H - Broadcast) antenna mounted H
„
„
(V - Broadcast) antenna mounted V (Upright)
„
„
3. Disconnect your Digital Receiver from the 230 V main power.
4. Connect the supplied RF cable to the antenna: carefully press the inner lead of the cable into
the Female-F connector at the back of the antenna. Turn the covering nut clockwise with
your HANDS until it is fi xed.
5. Connect the other side of the RF cable to your Digital Terrestrial Receiver. Normally the input
connector on your receiver is marked as "ANT" (in) or as "RF" (in).
6. Connect your Digital Receiver to the 230 V main power.
2
V
V
Advertisement
