Attaching/Detaching The Stand - Datalogic Gryphon I GPS4400 Quick Reference Manual

Setting Up the Reader

Attaching/Detaching the Stand

The reader can be removed or attached to the stand simply by snap-
ping on or off. To attach, align the holes on the bottom of the scanner
with the posts on the stand and push down to snap in place. To
remove, just pull straight up to detach the reader from the base.
For specific size information, see
Attaching/Detach-
ing the Stand
If desired, the stand can be mounted to a stationary surface using
two screws.
Stand bottom
12
GPS4400 Dimensions on page
Screw holes
29.
Gryphon™ GPS4400