Heart Rate Monitoring; Quick Start - Star Trac Fitness E-ST 5090 Owner's Manual

E series stepper
Hide thumbs Also See for Fitness E-ST 5090:
Table of Contents

Advertisement

HEART RATE MONITORING

Heart rate monitoring allows you to determine if your workout is too challenging or not challenging enough. Monitoring your heart rate
is easy with the STAR TRAC E-ST STEPPER. You may use a heart rate strap, or you can simply grasp the silver contact heart rate
grips. Your goal will be to keep your exercise heart rate between 60 and 90 percent of the theoretical maximum for your age, as shown
in the accompanying Target Heart Rate table.
NOTE: The Heart Rate monitor is not a medical test, nor is it designed as a medical test. It is simply a guide to target heart rate train-
ing. Please consult with your physician prior to engaging in any strenuous physical activity.
NOTE: If both the heart rate grips and a heart rate strap are being used, the heart rate grips will override and be displayed in the HR
window.
IMPORTANT: The manufacturer does not warrant the heart rate system performance on this product, as the heart rate system per-
formance varies, based on a user's physiology, fitness level, age, method of use and other factors. Furthermore, the heart rate system
is not for medical use.
C
H
ONTACT
EART
You may use the heart rate contact grips to automatically check your heart rate while stepping. Just follow these steps.
1. Grasp the stainless steel heart rate contact grips; you do not have to squeeze tightly.
When the heart rate contact grips are grasped, the
n
rate has been detected.
2. It may take from 30 to 60 seconds for the heart rate system to acquire and display your heart rate.
3. When your heart rate has been acquired, the
RATE field of the Information Window.
4. Release the Heart Rate grips if you wish to remove your heart rate reading from the display.
C
S
H
HEST
TRAP
You may use the heart rate strap to automatically check your heart rate. Just follow these steps:
1. Before beginning your workout, or during a pause, moisten the back of the transmitter on the heart rate strap. Place the strap
snugly around your chest with the transmitter resting directly over your sternum.
2. When your heart rate has been acquired, the
RATE field of the Information Window.
3. Remove the heart rate strap if you wish to remove your heart rate reading from the display.
NOTE: The performance of the transmitter may be affected by body types, body oils, metal in clothing, and outside electrical interfer-
ence. Always be sure that the transmitter and skin are in good contact. Avoid operating other electrical equipment near your Stepper
when you use the heart rate strap.

QUICK START

Quick Start lets you begin your workout by simply pressing one key, or by stepping for approximately 13 seconds without pressing any
key. Quick Start uses a default weight as set in Manager/Maintenance Mode, a difficulty L
Manager/Maintenance Mode. YOU control resistance L
To operate the Quick Start program:
1. Mount the Stepper, begin stepping, and press the Q
2. If desired, you can use the personal fan during your workout (see "Using the Personal Fan" for details).
3. You can adjust the difficulty L
Use the
n
key to confirm the difficulty L
Press the
or
n
4. You can scroll through workout data during the program (see "Viewing Workout Data During a Program" for details).
18
R
M
ATE
ONITORING
R
M
EART
ATE
ONITORING
EVEL
during the program, using either of the following methods.
EVEL
keys to enter a difficulty L
EVEL
.
EVEL
key, as desired, to increase or decrease the difficulty L
will display and an audible "beep" will sound to indicate that a heart
indicator and your heart rate in beats per minute (BPM) display in the HEART
indicator and your heart rate in beats per minute (BPM) display in the HEART
during the entire program.
S
key.
UICK
TART
(from 1 to 20). When the desired level has been entered, press the
STAR TRAC E-ST STEPPER O
of 1, and a time limit as set in
EVEL
in 1 unit increments.
EVEL
WNER
'
M
S
ANUAL

Advertisement

Table of Contents
loading

Table of Contents