Gigaset DX800A User Manual page 4

Description of new and updated functions
Mode:
Telephony / Fax
Activate the FAX port. You can connect a fax machine or a multifunction device
(fax/telephone) to the FAX port.
You can assign an external connection for the fax connection. The first MSN in
the configuration (ISDN) or the analogue fixed line are assigned to the fax con-
nection automatically as a send connection. All configured connections to the
telephone are assigned to the FAX port as receive connections.
You can change this assignment (
ing send and receive connections to internal parties" section in the user guide
for your Gigaset).
Doorline
Activate the FXS port. You can connect a corded, analogue doorline interface,
working with DTMF codes.
The FAX port can only be used for internal connections. Neither send nor receive
connections are assigned to it.
To ensure that internal calls can be made from the door intercom to the base and
the registered handsets, you must define the internal numbers (numbers 1–7)
and asterisk * (for group calls) as DTMF codes when configuring the door inter-
com.
Calls from the door intercom are displayed on the base/handsets as normal
internal calls.
Off
Deactivate the FAX port. INT 8 will be removed from the internal list. It is no
longer possible to establish a connection to/via FAX port.
To control the doorline device the base station must send different DTMF codes to
the doorline device. When you have selected the Doorline mode, the following
fields are displayed in which you can enter the needed codes (4 characters maxi-
mum, permitted are the digits 0..9 and the special characters "#" , "*"). The values of
the DTMF codes for the door intercom are preset by default according to country.
Door Open Code:
Insert a DTMF code for triggering the door opening mechanism.
Door Connect Code:
Insert a DTMF code for accepting the call and connecting the audio channel.
Door Disconnect Code:
Insert a DTMF code for ending the call and disconnecting the audio channel.
¤
Press the
4
§Save§
display key to save the settings.
£
"Configuring the system settings — Assign-