Table of Contents
Advertisement
Description of new and updated functions
Notes on the FXS port in Telephony / Fax mode
If you connect a multifunction device (fax/telephone) to the FAX port, you must
note the following:
u
For incoming calls, the phone number of the caller is not displayed.
u
If the answering machine takes a call on the device's receive connection, it con-
tinues to ring.
u
If a receive connection is only assigned to the fax machine/phone, then calls to
the corresponding number will not be entered in the call lists (it is not possible
to delete the entries from the base or a handset).
u
To call an internal subscriber or to make an internal consultation call during an
external call enter an „R" in front of the corresponding internal number.
u
Other internal functions such as "internal transfer" are not supported.
u
For external calls, you cannot use your provider's features/network services (e.g.
external consultation call, three-party conferences, display external waiting
calls).
Due to the restrictions listed, we do not recommend connecting analogue tel-
ephones without fax functionality to the FAX port.
Notes on the FXS port in Doorline mode
u
If one of the participants of the internal call is a doorline device, an incoming
external or internal call is not signalled (as call waiting) to any of the participants.
If no other handset can present the call, the caller hears the busy tone.
u
An incoming call from the doorline device during an internal or external call is
presented as regular internal call waiting. Before you can accept the call from the
doorline device you have to end the external/internal call.
Answering machine:
Recording two user specific announcements for the answer &
record mode
Recording an announcement
This section amends the section „Operating the base's answering machine - Operating via the
base - Recording a personal announcement/advisory" in the user guide for your Gigaset
phone.
For each answering machine you now can record two personal announcements for
the answer and record mode and one advisory message for answer only mode.
You can record the two announcements as follows:
¢
v
Ì
q
q
§OK§
You hear the ready tone (short tone).
6
Please note
¢
Announcements
If necessary, select answering machine and press
Select Announcement 1 /Announcement 2 and press
Press the display key to start the recording.
¢
Record Announcemnt.
§OK§
.
§OK§
.
Advertisement
Table of Contents
