Playing Back Announcements - Gigaset DX800A User Manual

¤
Now say your announcement (at least 3 seconds).
§End§
Press the display key to end the recording.
After recording, the announcement is played back for you to check. You can re-
record the announcement with

Playing back announcements

This section amends the section „Operating the base's answering machine - Operating via the
base - Playing back announcements" in the user guide for your Gigaset phone.
You can play back the announcements as follows:
¢ ¢
v Ì
Announcements
q
If necessary, select answering machine and press
q
Select Announcement 1 /Announcement 2 and press
If the selected announcement has not been recorded or has been deleted, the pre-
recorded announcement is played back instead.
Activating answering machine, selecting an announcement
This section amends the section „Operating the base's answering machine - Operating via the
base - Activating/deactivating and setting answering machine mode" in the user guide for
your Gigaset phone.
¢ ¢
v Ì
Activation
q
If necessary, select answering machine (μ= on).
§OK§
Press the display key.
¤
You can enter data in the following fields:
Activation:
Select On or Off to activate/deactivate the answering machine.
Mode:
Select Answer & Record, Answer only or Alternating.
If Answer & Record or Alternating is selected:
Answer & Record with:
Select Announcement 1 /Announcement 2.
If the selected announcement has not been recorded or has been deleted, the
pre-recorded announcement is used instead of that.
If Alternating mode is selected:
Record from:
Enter hours/minutes for the start of the period in 4-digit format.
(The time must be set.)
Record until:
Enter hours/minutes for the end of the period in 4-digit format.
§Save§
Press the display key.
Please note
If no system time is available, the answering machine changes from Alternating
or Answer & Record mode to Answer only mode until the system time is avail-
able again.
Description of new and updated functions
§New§
.
¢
Play Announcement
§OK§
.
§OK§
.
7