Using The Self-Timer Setting - HP Photosmart M440 series User Manual

Hewlett-packard digital camera user guide
Hide thumbs Also See for Photosmart M440 series:
Table of Contents

Advertisement

(continued)
M540 series:
M440 series:
Burst (
setting" on page
Color (M440 series only;
To set
Full Color (Default), Black & White, Sepia
Date & Time Imprint (
remains in effect until it is changed, even when you turn off the camera.
Camera Setup...—Displays the
(see
Camera Help...—Displays a list of help topics for commonly used features.
NOTE:
Some menu options are not available in certain shooting modes.

Using the Self-Timer setting

The
Self-Timer allows you to take an image or video clip 10 seconds after pressing
the Shutter button.
1. While in the
Self-Timer, press
disappears.
2. Set the camera on a tripod or stable surface.
3. Frame the subject in the Image Display.
4. Press the Shutter button halfway down to lock focus and exposure. When the focus
brackets turn green, press the Shutter button all the way down. The camera begins
the 10-second countdown, then takes the picture or begins recording the video clip.
5. If you are recording a video clip, press the Shutter button to stop recording.
6MP Best—For enlarging or printing images greater than 28 x 36 cm (11 by 14 in).
Normal (6MP) (Default)—For printing images up to 28 x 36 cm (11 by 14 in).
4MP—For printing images up to 20 x 25 cm (8 by 10 in).
2MP—For printing images up to 13 x 18 cm (5 by 7 in).
VGA—For sending images via e-mail or posting them to the Internet.
5MP Best—For enlarging or printing images greater than 28 x 36 cm (11 by 14 in).
Normal (5MP) (Default)—For printing images up to 28 x 36 cm (11 by 14 in).
3MP—For printing images up to 20 x 25 cm (8 by 10 in).
1MP—For printing images up to 10 x 15 cm (4 by 6 in).
VGA—For sending images via e-mail or posting them to the Internet.
only)—For taking multiple shots quickly in succession (see
16).
only)—Sets the color in which your image will be captured.
Color for M630/M540 series, see
only)—Imprints date in lower left corner of image. The setting
Off (Default)—No date or time imprinted on the image.
Date Only—Date permanently imprinted.
Date & Time—Date and time permanently imprinted.
"Using the Camera Setup Menu" on page
Picture Capture or
, highlight On, press
Using the Picture Capture and Video Record menus
"Modifying colors" on page
Camera Setup Menu for setting camera behavior
31).
Video Record menu, use
, then hold down
"Using the Burst
21.
to highlight
until the menu
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents