Using The Camera Setup Menu - HP Photosmart M440 series User Manual

8

Using the Camera Setup Menu

The Camera Setup Menu allows you to set preferences for the camera's behavior.
The Camera Setup Menu is available from the
Record, and
1. While in the
to highlight
2. Use
menu.
3. Use
4. To exit the
Settings you specify remain until you change them.
Display Brightness—Adjusts the brightness of the Image Display.
•
•
•
Camera Sounds—Turns the camera sounds (such as button presses and shutter clicks)
off and on.
On (Default), Off.
Date & Time—Sets the date and time. See
USB Configuration—Specifies how a computer recognizes the camera. See
"Connecting to the computer" on page
•
•
on page
Playback menus.
Picture Capture,
Camera Setup..., then press
to highlight a menu option, then press
to highlight a setting, then press
Camera Setup Menu, hold down
Low—For extending battery life.
Medium (Default)—For normal viewing conditions.
High—For very bright lighting conditions.
Digital Camera (Default)—Recognizes the camera as a digital camera using PTP
(Picture Transfer Protocol).
Disk Drive—Recognizes the camera as a disk drive using MSDC (Mass Storage
Device Class).
(Language)—Sets the language. See
5.
Picture Capture,
Video Record, or Playback menu, use
.
to display the menu option's
.
until the menu disappears.
"Set the date and time" on page
24.
"Choose the language"
Using the Camera Setup Menu
Video
5.
31