Using The Self-Timer Setting; Using The Burst Setting - HP Photosmart E330 series User Manual

Chapter 3
(continued)
Date & Time Imprint—Imprints date in lower left corner of pictures only. The setting
remains in effect until it is changed, even when you turn off the camera.
•
•
•
Camera Setup...—Displays the
(see
Camera Help...—Displays a list of help topics for commonly used features.
NOTE: Some menu options are not available in certain shooting modes.

Using the Self-Timer setting

The Self-Timer allows you to take an image or video clip 10 seconds after pressing
the Shutter button.
1. If you want to record a video clip or change the shooting mode, access the
Capture Menu, use
Video or another shooting mode, press
Picture Capture Menu.
2. In the
highlight On, press
3. Set the camera on a tripod or stable surface.
4. Frame the subject in the Image Display or the viewfinder.
5. Press the Shutter button all the way down. The camera begins the 10-second
countdown, then takes the picture or begins recording the video clip.
6. If you are recording a video clip, press the Shutter button to stop recording.
The Self-Timer setting resets to Off after the image is taken.

Using the Burst setting

Burst allows you to take up to two pictures as quickly as possible when you press
and hold the Shutter button all the way down.
1. While in the
, highlight On, press
2. Frame the subject, then press the Shutter button all the way down and hold it. The
camera takes up to two pictures as quickly as possible until you release the
Shutter button or the camera runs out of memory.
The Image Display remains off during the burst capture. After the burst images have been
taken, each image appears one at a time in Instant Review (see
on page 9). You can delete the entire burst sequence in Instant Review. To delete
individual images, see
The Burst setting remains in effect until it is changed again, or until it resets to the
default Off setting when you turn off the camera.
12 Setting options for taking pictures and recording video clips
Off (Default)—No date or time imprinted on the image.
Date Only—Date permanently imprinted.
Date & Time—Date and time permanently imprinted.
"Using the Camera Setup Menu" on page
to highlight
Picture Capture Menu, use
, then hold down
Picture Capture Menu, use
, then hold down
"Deleting images" on page
Camera Setup Menu for setting camera behavior
25).
Shooting Mode, press
, then press
to highlight Self-Timer, press
until the menu disappears.
to highlight
until the menu disappears.
14.
Picture
, highlight either
to return to the
,
Burst , press
"Instant Review"