Cropping Images - HP Photosmart M440 series User Manual

Chapter 5
Add Borders allows you to add one or more predefined borders to the displayed
image. To add a border:
1. From the
.
2. Use
• Soft Edge—Applies a soft, vignetted frame to the image.
• Oval—Adds an oval matte border with beveled edges.
• Rectangle—Adds a rectangular matte border with sharp corners.
3. Press
Follow the on-camera instructions to adjust the border.
4. Press
Design Gallery Menu. Press
Borders menu.

Cropping images

Crop allows you to crop the displayed image to the selected orientation, then use
the Zoom lever and
TIP: Make sure you crop images as needed before adding borders.
1. From the
2. Use
• Landscape (Default)—Horizontally crops the displayed image to a 3:2 aspect
ratio (one third wider than tall).
• Portrait—Vertically crops the displayed image to a 2:3 aspect ratio (one-third
taller than wide).
Follow the on-camera instructions to use the Zoom lever and adjust what appears in
the cropped image.
3. Press
Menu. Press
When you print, the normal aspect ratios get cropped on the top and bottom (landscape)
or on the sides (portrait). Cropping helps ensure that the content you want gets printed.
22 Using the Design Gallery Menu
Design Gallery Menu, use
to select a border type and preview the effect it has on the image.
to select the border and display the
to save a copy of the image with the specified border and return to the
to ensure that the image content you want gets saved.
Design Gallery Menu, use
to select a crop orientation and preview the effect it has on the image.
to save a copy of the cropped image and return to the
to exit without saving and return to the
to select Add Borders, then press
Add Borders menu.
to exit without saving and return to the
to select Crop, then press
Crop menu.
Add
.
Design Gallery