Using The Self-Timer Setting; Using The Burst Setting - HP Photosmart M437 User Manual

(continued)
•
•
Burst (
Burst setting" on page
until you turn off the camera.
Date & Time Imprint (
remains in effect until it is changed, even when you turn off the camera.
•
•
•
Camera Setup...—Displays the
(see
Camera Help...—Displays a list of help topics for commonly used features.
NOTE: Some menu options are not available in certain shooting modes.

Using the Self-Timer setting

The Self-Timer allows you to take an image or video clip 10 seconds after pressing
the Shutter button.
1. While in the
Self-Timer, press
disappears.
2. Set the camera on a tripod or stable surface.
3. Frame the subject in the Image Display.
4. Press the Shutter button halfway down to lock focus and exposure. When the focus
brackets turn green, press the Shutter button all the way down. The camera begins
the 10-second countdown, then takes the picture or begins recording the video clip.
5. If you are recording a video clip, press the Shutter button to stop recording.
TIP: If you want to include yourself in the picture, place the camera on a tripod or
stable surface, then press the Shutter button all the way down. The camera locks
focus and exposure just before the end of the countdown, allowing you time to place
yourself in the scene.
The Self-Timer setting resets to Off after the image is taken.

Using the Burst setting

Burst allows you to take up to three pictures as quickly as possible when you press
and hold the Shutter button all the way down.
1. While in the
, highlight On, press
2. Frame the subject, then press the Shutter button halfway down to lock the focus and
exposure. Then press the Shutter button all the way down and hold it. The camera
takes up to three pictures as quickly as possible until you release the Shutter button
or the camera runs out of memory.
1MP—For printing images up to 10 x 15 cm (4 by 6 in).
VGA—For sending images via e-mail or posting them to the Internet.
only)—For taking up to three shots quickly in succession (see
15). The setting remains in effect until it is changed again, or
only)—Imprints date in lower left corner of image. The setting
Off (Default)—No date or time imprinted on the image.
Date Only—Date permanently imprinted.
Date & Time—Date and time permanently imprinted.
"Using the Camera Setup Menu" on page
Picture Capture or
, highlight On, press
Picture Capture Menu, use
, then hold down
Using the Picture Capture and Video Record menus
Camera Setup Menu for setting camera behavior
31).
Video Record menu, use
, then hold down
to highlight
until the menu disappears.
"Using the
to highlight
until the menu
Burst , press
15