Indicators On The Control Panel - Fujitsu PRIMERGY TX120 S2 Operating Manual

Controls and indicators
5.2.1.2

Indicators on the control panel

Power-on indicator (two colors)
Lights orange when the server is switched off but mains voltage is
present.
Lights up green when the server is switched on and ready.
Hard disk activity indicator (green)
Flashes green when an internal hard disk drive is being accessed.
Global Error indicator (orange)
!
Does not light up when the system is OK. No service incident or
critical event has occurred.
Lights up orange when a predictable error has been detected.
Users can check the System Event Log or via the ServerView
Operations Manager for more detailed information.
Flashes orange when a critical event has occurred. Users can
check for event details in the BIOS Setup, the System Event Log
or via the ServerView Operations Manager.
If the event is still acute after a power failure, the indicator is
activated after the restart.
ID ID indicator (blue)
Lights up blue when the system has been selected by pressing the
ID button. To deactivate, press the button again.
The ID indicator can also be activated via the ServerView
Operations Manager and the iRMC S2 Web interface and its
status reported to the ServerView Operations Manager and the
iRMC S2.
50 Operating manual
Starting up and operation
TX120 S2