Controls - Fujitsu PRIMERGY TX120 S2 Operating Manual

Starting up and operation
5.2.1.1

Controls

On/Off button
When the system is switched off, it can be switched on again by
pressing the On/Off button.
When the system is operating, pressing the On/Off button will
switch off the system.
I
NMI NMI button
V
RST Reset button
Pressing the reset button reboots the system.
V
ID ID button
When this button is pressed, the ID display (blue) on the front of the
server lights up.
TX120 S2
The On/Off button does not disconnect the server from the
mains voltage. To disconnect from the mains completely,
remove the power plug(s).
CAUTION!
Do not press! Risk of loss of data!
The NMI button may only be used by service.
CAUTION!
Risk of loss of data!
Operating manual
Controls and indicators
49