Configuring The Sas/Sata Raid Controller - Fujitsu PRIMERGY TX120 S2 Operating Manual

Configuring the server
5.4.2

Configuring the SAS/SATA RAID controller

The server has a SAS/SATA RAID controller with "Integrated Mirroring
Enhanced" functionality or "MegaRAID functionality". You can configure the
SAS/SATA RAID controller either before or during installation with the
ServerView Installation Manager. Using the ServerView Installation Manager is
recommended.
I
The controller makes a separate utility available for IME configuration.
For further information, refer to the "Integrated RAID for SAS User's
Guide" (on the PRIMERGY ServerView Suite DVD 2 under Industry
Standard Servers - Expansion Cards - Storage Adapters - LSI RAID / SCSI
Controllers).
A separate utility is available to the controller for MegaRAID configu-
ration. For further information, refer to the "SAS Software User's Guide"
(on the PRIMERGY ServerView Suite DVD 2 under Industry Standard
Servers - Expansion Cards - Storage Adapters - LSI Configuration Software).
Further information on modular RAID controllers is provided in the
"Modular RAID Controller Installation Guide" (on the PRIMERGY
ServerView Suite DVD 2 under Industry Standard Servers - Expansion Cards
- Storage Adapters - LSI RAID / SCSI Controllers).
I
Descriptions of operating systems not covered in the controller manual
are provided in the corresponding readme files on the driver CDs.
56 Operating manual
Starting up and operation
TX120 S2