Server Switches Itself Off; Screen Remains Blank - Fujitsu PRIMERGY TX120 S2 Operating Manual

Hide thumbs Also See for PRIMERGY TX120 S2:
Table of Contents

Advertisement

Server switches itself off

7.2
Server switches itself off
Server Management has detected an error
Ê Check the error list or the ErrorLog file in the ServerView Operations
Manager, and attempt to eliminate the error.
7.3

Screen remains blank

Monitor is switched off
Ê Switch on your monitor.
Screen has gone blank
Ê Press any key on the keyboard.
or
Ê Deactivate screen saver. Enter the appropriate password.
Brightness control is set to dark
Ê Set the brightness control on the monitor to light. For detailed information,
refer to the operating manual supplied with your monitor.
Power cable or monitor cable not connected
Ê Switch off the monitor and the server.
Ê Check whether the power cable is properly connected to the monitor and to
the grounded socket.
Ê Check whether the monitor cable is properly connected to the server and
monitor (if it is plugged in with a connector). If a separate graphics card is
installed in the server, then the monitor cable must be connected to the
graphics card.
Ê Switch on the monitor and the server.
62
Operating manual
Troubleshooting and tips
TX120 S2

Advertisement

Table of Contents
loading

Table of Contents